1
/
of
1
アサヒペン
One Touch Tile/Concrete Adhesive 200ml Asahipen
One Touch Tile/Concrete Adhesive 200ml Asahipen
Regular price
¥858 JPY
Regular price
Sale price
¥858 JPY
Unit price
/
per
Tax included.
Couldn't load pickup availability
[For those purchasing from overseas]
Import taxes and duties are not included in the item price or shipping cost. These payments are the responsibility of the buyer.
Please check with your country's customs office to determine what these additional costs will be before purchasing.
One-touch type that can be squeezed by hand!
Comes with a spatula and can be adhered to uneven surfaces
Water-based so there is little odor
Features
●Suitable for adhesive repair of cracks, chips, etc. in tiles, wood, and concrete.
●Excellent adhesive strength, water resistance, and weather resistance.
●Since it is water-based, there is little odor and there is no need to worry about fire.
●Can be bonded even if the adhesive surface is slightly uneven.
●Can be attached to areas where screws or nails cannot be used.
Purpose
For adhesive repair of cracks and chips in tiles, wood, bricks, concrete, mortar, etc.
[Materials that can be bonded]
●Tile, brick, wood, cork, concrete, gypsum board, rigid insulation board, styrofoam
[Materials that cannot be bonded]
●Polyethylene, polypropylene, fluororesin, silicone resin, soft PVC, glass, rubber
*Please do not use on the floor.
*Not suitable for areas that are constantly exposed to water, or areas that are constantly damp.
*Be sure to use on both sides or one side of materials that have suction, such as concrete or wood. Materials that do not absorb suction (metal, plastic, etc.) cannot be bonded together.
*Please do not bond precious metals or high-priced items.
[Necessary equipment]
Rubber gloves, safety glasses, wire brush, scraper, spatula, comb trowel, masking tape, etc.
[Construction procedure]
●Remove dirt, dust, moss, mold, oil, etc. from the repaired area using a wire brush, scraper, neutral detergent, paint thinner, etc., and dry thoroughly.
●Make sure to evenly distribute the contents by carefully handling the container with your hands.
●Turn the nozzle counterclockwise to remove it, and cut the tip of the nozzle to match the repair area. After removing the inner lid, attach the nozzle.
●Extrude this product in dots, lines, or wavy lines onto one side of the surface to be adhered, and spread it evenly with a spatula or comb-toothed trowel. If you are gluing a large surface, remove the nozzle and squeeze out the contents.
●After applying, press firmly. You can adjust the position of the adhesive surface for about 5 minutes after crimping.
●Please close the inner lid firmly after use.
Notes
●Do not use for purposes other than those indicated.
●Do not use if you are unwell or if you are allergic or sensitive to chemicals.
●Please ventilate well when using.
●For your safety, wear rubber gloves and safety goggles to avoid contact with your skin.
●Please work in clothes that you do not mind getting dirty.
●Although it will show some adhesive strength in 1 to 2 hours, it will take 24 to 48 hours for final hardening, so please do not move it until then.
●When gluing heavy objects to the wall, temporarily secure them with tape.
●If a large amount of weight is applied to the adhesive surface, it may peel off.
●When working outdoors, do not use when the temperature is below 5℃ from the time you start work until curing is complete, or when rain is expected within 24 hours.
●Do not use when the base is damp or wet. If it contains moisture, it may not cure sufficiently and may not adhere. Be sure to make sure the base is dry before using. Also, please do not allow water to come into contact with it for 24 hours after installation.
●If the hole at the tip of the nozzle is 3 mm or less, it may be difficult to get the contents out when pushing it out by hand. In that case, cut the tip of the nozzle again to make the hole larger.
●After use, wash the nozzle and tools with water or soapy water before they harden.
●Please handle with care as dropping this product may cause a hole in the main body.
standard
200ml
amount to use
[Construction amount]
Approximately 60cm x 60cm
Number of colors/color name
white
Material/components
Acrylic resin, inorganic filler, water
curing time
[Initial contact]
1-2 hours
[Final curing]
24-48 hours
This product JAN code
4970925313171
*Please note that specifications and designs of listed products may change without prior notice.
Import taxes and duties are not included in the item price or shipping cost. These payments are the responsibility of the buyer.
Please check with your country's customs office to determine what these additional costs will be before purchasing.
One-touch type that can be squeezed by hand!
Comes with a spatula and can be adhered to uneven surfaces
Water-based so there is little odor
Features
●Suitable for adhesive repair of cracks, chips, etc. in tiles, wood, and concrete.
●Excellent adhesive strength, water resistance, and weather resistance.
●Since it is water-based, there is little odor and there is no need to worry about fire.
●Can be bonded even if the adhesive surface is slightly uneven.
●Can be attached to areas where screws or nails cannot be used.
Purpose
For adhesive repair of cracks and chips in tiles, wood, bricks, concrete, mortar, etc.
[Materials that can be bonded]
●Tile, brick, wood, cork, concrete, gypsum board, rigid insulation board, styrofoam
[Materials that cannot be bonded]
●Polyethylene, polypropylene, fluororesin, silicone resin, soft PVC, glass, rubber
*Please do not use on the floor.
*Not suitable for areas that are constantly exposed to water, or areas that are constantly damp.
*Be sure to use on both sides or one side of materials that have suction, such as concrete or wood. Materials that do not absorb suction (metal, plastic, etc.) cannot be bonded together.
*Please do not bond precious metals or high-priced items.
[Necessary equipment]
Rubber gloves, safety glasses, wire brush, scraper, spatula, comb trowel, masking tape, etc.
[Construction procedure]
●Remove dirt, dust, moss, mold, oil, etc. from the repaired area using a wire brush, scraper, neutral detergent, paint thinner, etc., and dry thoroughly.
●Make sure to evenly distribute the contents by carefully handling the container with your hands.
●Turn the nozzle counterclockwise to remove it, and cut the tip of the nozzle to match the repair area. After removing the inner lid, attach the nozzle.
●Extrude this product in dots, lines, or wavy lines onto one side of the surface to be adhered, and spread it evenly with a spatula or comb-toothed trowel. If you are gluing a large surface, remove the nozzle and squeeze out the contents.
●After applying, press firmly. You can adjust the position of the adhesive surface for about 5 minutes after crimping.
●Please close the inner lid firmly after use.
Notes
●Do not use for purposes other than those indicated.
●Do not use if you are unwell or if you are allergic or sensitive to chemicals.
●Please ventilate well when using.
●For your safety, wear rubber gloves and safety goggles to avoid contact with your skin.
●Please work in clothes that you do not mind getting dirty.
●Although it will show some adhesive strength in 1 to 2 hours, it will take 24 to 48 hours for final hardening, so please do not move it until then.
●When gluing heavy objects to the wall, temporarily secure them with tape.
●If a large amount of weight is applied to the adhesive surface, it may peel off.
●When working outdoors, do not use when the temperature is below 5℃ from the time you start work until curing is complete, or when rain is expected within 24 hours.
●Do not use when the base is damp or wet. If it contains moisture, it may not cure sufficiently and may not adhere. Be sure to make sure the base is dry before using. Also, please do not allow water to come into contact with it for 24 hours after installation.
●If the hole at the tip of the nozzle is 3 mm or less, it may be difficult to get the contents out when pushing it out by hand. In that case, cut the tip of the nozzle again to make the hole larger.
●After use, wash the nozzle and tools with water or soapy water before they harden.
●Please handle with care as dropping this product may cause a hole in the main body.
standard
200ml
amount to use
[Construction amount]
Approximately 60cm x 60cm
Number of colors/color name
white
Material/components
Acrylic resin, inorganic filler, water
curing time
[Initial contact]
1-2 hours
[Final curing]
24-48 hours
This product JAN code
4970925313171
*Please note that specifications and designs of listed products may change without prior notice.
Share
