One-touch wall crack repair material (for concrete) light gray 200ml Asahipen

[For those purchasing from overseas]
Import taxes and duties are not included in the item price or shipping cost. These payments are the responsibility of the buyer.
Please check with your country's customs office to determine what these additional costs will be before purchasing.

One-touch type that can be squeezed by hand!
Comes with finishing spatula, can be used indoors and outdoors

Features
●Since it is a pouch container, you can use it by pushing the contents directly into the repair area by hand.
●Resin mortar with strong adhesion and excellent durability.
●Can be used indoors and outdoors, and can be painted with water-based paint after repair.

Purpose
A repair material for cracks in concrete, mortar, bricks, rocks, stones, etc. indoors and outdoors.
*Please do not use on the floor.
*Not suitable for areas that are constantly exposed to water, or areas that are constantly damp.

[Necessary equipment]
Rubber gloves, safety glasses, wire brushes, scrapers, spatulas, masking tape, utility knives, etc.

[Construction procedure]
●Remove dirt, dust, moss, mold, oil, etc. from the repaired area using a wire brush, scraper, neutral detergent, paint thinner, etc., and dry thoroughly.
●Make sure to evenly distribute the contents by carefully handling the container with your hands.
●Turn the nozzle counterclockwise to remove it, and cut the tip of the nozzle to match the repair area. After removing the inner lid, attach the nozzle.
●Press the nozzle tip against the area to be repaired and move it around while pushing out the contents with your hands to fill the area. (If you apply masking tape on both sides of the repaired area in advance, you can prevent it from sticking out and get a clean finish.)
●Smooth the surface of the repaired area with a spatula. After curing, apply sandpaper (#180 to #280) to make the surface smoother.
*If you want to paint the repaired area, wait at least 2 days before painting.

Notes
●Do not use for purposes other than those indicated.
●Do not use if you are unwell or if you are allergic or sensitive to chemicals.
●For your safety, wear rubber gloves and safety goggles to avoid contact with your skin.
●Please work in clothes that you do not mind getting dirty.
●Depending on the base material used, adhesion may be difficult. Please try it on an inconspicuous area before use.
●Do not use when the temperature is below 5℃ from the start of work until curing is complete, or when rain is expected within 30 hours.
●Do not use when the base is damp or wet. It may not cure sufficiently and may absorb moisture and swell. Be sure to make sure the base is dry before using. Also, please do not allow water to come into contact with it within 30 hours after installation.
●Curing time and amount of application may vary slightly depending on weather and construction conditions.
●Depending on the depth and width of filling, the filled area may crack or discolor. In that case, please fill it again.
●If the hole at the tip of the nozzle is 3 mm or less, it may be difficult to get the contents out when pushing it out by hand. In that case, cut the tip of the nozzle again to make the hole larger.
●After use, wash the nozzle and tools with water or soapy water before they harden.
●Please handle with care as dropping this product may leave a hole in the main body.

standard
200ml

amount to use
[Construction amount]
When repairing a crack that is 6mm wide and 6mm deep
Approximately 5.4m

Number of colors/color name
3 colors: gray, light gray, white

Material/components
Acrylic resin, inorganic filler, pigment, water

curing time
[Surface drying]
Summer/approx. 4 hours Winter/approx. 6 hours

This product JAN code list
4970925313126, 4970925313133, 4970925313140

*Please note that specifications and designs of listed products may change without prior notice.