One-touch floor crack repair material (for asphalt) 200ml Asahipen

[For those purchasing from overseas]
Import taxes and duties are not included in the item price or shipping cost. These payments are the responsibility of the buyer.
Please check with your country's customs office to determine what these additional costs will be before purchasing.

One-touch type that can be squeezed by hand!
Just pour it into the cracks
Comes with a finishing spatula to suppress weed growth

Features
●Resin mortar that does not need to be mixed with water and can be used as is.
●It can be used indoors and outdoors, and comes with an easy-to-use nozzle.
●After drying, water-based paint can be applied.

Purpose
A repair material for cracks (5 mm or less in width) on horizontal concrete and asphalt floors indoors and outdoors.
*Not suitable for areas that are constantly exposed to water, or areas that are constantly damp.
*Not suitable for wall surfaces.

[Necessary equipment]
Rubber gloves, safety glasses, wire brush, plastering trowel or spatula, etc.

[Construction procedure]
●Remove dirt, dust, moss, mold, oil, aged parts, etc. from the repaired area using a wire brush or detergent, and dry thoroughly.
●Make sure to evenly distribute the contents by carefully handling the container with your hands.
●Turn the nozzle counterclockwise to remove it, and cut the tip of the nozzle to match the repair area. After removing the inner lid, attach the nozzle.
●Press the nozzle tip against the crack, push the contents out of the container, move it, fill the crack, and push it in with a trowel or spatula. (Up to 6mm depth at one time)
●For deep cracks, fill in fine sand to a depth of 6mm from the floor surface and inject this product from above.
●If thinning occurs after curing, apply this product again on top of it.

Notes
●Do not use for purposes other than those indicated.
●Do not use if you are unwell or if you are allergic or sensitive to chemicals.
●For your safety, wear rubber gloves and safety goggles to avoid contact with your skin.
●Please work in clothes that do not cause problems even if they get dirty.
●Do not use when the temperature drops below 5℃ from the start of work until drying is complete, or when rain is expected within 48 hours.
●Do not use when the base is damp or wet. It may not dry properly and may absorb moisture and swell. Be sure to make sure the base is dry before using. Also, please do not expose it to water for 48 hours after installation.
●Curing time and amount of application may vary slightly depending on weather and construction conditions.
●Depending on the depth and width of the work, the work area may crack or become thin. In that case, please perform the construction again.
●If the contents are difficult to come out, cut off the tip of the nozzle to make the hole larger.
●It will take about 48 hours for the inside of the crack to dry completely, so be careful not to apply pressure to the repaired surface. If pressure is applied, the undried product inside may pop out to the surface.
●After use, wash the nozzle and tools with water or soapy water before they harden.
●Please handle with care as dropping this product may leave a hole in the main body.

standard
200ml

amount to use
[Construction amount]
When repairing a crack that is 5mm wide and 5mm deep
Approximately 7.6m

Number of colors/color name
For concrete: gray
For asphalt: black

Material/components
Acrylic resin, inorganic filler, pigment, water

curing time
[Surface drying]
Summer/approx. 3 hours Winter/approx. 6 hours
[Internal drying]
Approximately 48 hours

This product JAN code list
4970925313096

*Please note that specifications and designs of listed products may change without prior notice.