Tile/Wood/Concrete Adhesive Repair Material 200ml Asahipen One-Touch Repair

[For purchasers from overseas]
Import duties and taxes are not included in the item price or shipping charges. These payment obligations remain with the Buyer.
Please check with your country's customs office to determine what these additional amounts will be before purchasing.

For adhesive repair of tiles, bricks, wood and concrete walls
One-touch type

[Features]
●Suitable for adhesive repair of cracks and chips in tiles, wood and concrete.
●Excellent adhesion, water resistance, and weather resistance.
●Because it is water-based, there is little odor and there is no need to worry about fire.
●It can be adhered even if the adhesive surface has some unevenness.
●It is possible to adhere to places where screws and nails cannot be used.

[Use]
indoor/outdoor
●Adhesive repair of cracks and chips in tiles, wood, bricks, concrete and mortar.

[Materials that can be adhered]
Tile, brick, wood, cork, concrete, gypsum board, rigid insulation board, styrofoam

[Materials that cannot be bonded]
Polyethylene, polypropylene, fluorine resin, silicone resin, soft PVC, glass, rubber

【how to use】
●Remove dirt, dust, oil, etc. from the area to be repaired, and dry it well.
●Wash the container well with your hands to even out the contents.
●Turn the nozzle counterclockwise to remove it, and cut off the tip of the nozzle to match the area to be repaired.
After removing the inner lid, attach the nozzle.
●Extrude this product in dots, lines, or wavy lines on one side of the surface to be adhered, and spread it evenly with a spatula or combed trowel.
If you are gluing a large surface, remove the nozzle and squeeze out the contents.
●After application, apply strong pressure. You can adjust the position of the adhesive surface for about 5 minutes after crimping.
●Close the inner lid tightly after use.

【Notes】
●Do not use for purposes other than those indicated.
●For safety, wear rubber gloves and safety glasses.
●Work in clothes that you don't mind getting dirty.
●It shows a certain level of adhesive strength in 1-2 hours, but it takes 24-48 hours for final curing, so please do not move it until then.
●When attaching a heavy object to the wall, temporarily fix it with tape or the like.
●When working outdoors, do not use when the temperature drops below 5°C from the start of work until curing is complete, or when rain is expected within 24 hours.
●Do not use this product when the base is damp or wet. Hardening may be insufficient and may swell with moisture.
Make sure the base is dry before using.
Also, please do not get water for 30 hours after installation.
●Curing time and amount of application may vary slightly depending on weather conditions and application conditions.
●Depending on the depth and width of the filling, it may become thinner.
In that case, please fill it again.
●If the hole at the tip of the nozzle is 3 mm or less, it may be difficult to get the contents out when pushing out by hand.
In that case, cut off the tip of the nozzle again so that the hole becomes larger.
●Wash tools with water or soapy water after use before they harden.

【standard】
Capacity: 200ml
1 color
white

[Approximate usage amount]
Construction area
0.36m²

[Material/ingredients]
resin, inorganic filler
Liquidity: Weakly alkaline

【Drying time】
Initial adhesion: 1-2 hours
Final cure: 24-48 hours

Our product JAN code
4970925310910