Rain Leak Prevention Repair Material for Iron Parts 200ml Asahipen One-touch Repair for Iron Parts

[For purchasers from overseas]
Import duties and taxes are not included in the item price or shipping charges. These payment obligations remain with the Buyer.
Please check with your country's customs office to determine what these additional amounts will be before purchasing.

For cracks in outdoor iron parts, galvanized iron, stainless steel, etc.
One-touch type

[Features]
●Since it is a pouch container, you can use it by pushing out the contents directly to the repaired area.
A repair material for iron parts with strong adhesion and excellent durability.
●It has excellent weather resistance and protects your home from rainwater infiltration.
●Water-based paint and oil-based paint can be applied after repair.

[Use]
outdoor
●Repair cracks and holes in outdoor iron parts, galvanized iron, stainless steel, etc.
●Repair gaps between joints between iron parts and exterior walls (wood, slate, mortar, concrete, etc.), and gaps between iron fixtures and exterior walls.
*Do not use on the floor.
* Not suitable for places where water is constantly splashed or submerged in water, or where it is always damp.

【how to use】
●Remove dirt, dust, oil, etc. from the area to be repaired, and dry it well.
●Wash the container well with your hands to even out the contents.
●Turn the nozzle counterclockwise to remove it, and cut off the tip of the nozzle to match the area to be repaired.
After removing the inner lid, attach the nozzle.
●Press the tip of the nozzle against the area to be repaired, push out the contents with your hand, and move it to fill. (If you put masking tape on both ends of the repaired area in advance, you can prevent it from sticking out.) ● Smooth the surface of the repaired area with a spatula.
*When painting the repaired area, wait at least 2 days before painting.

【Notes】
●Do not use for purposes other than those indicated.
●For safety, wear rubber gloves and safety glasses.
●Work in clothes that you don't mind getting dirty.
● Depending on the base material used, it may be difficult to adhere. Please test on an inconspicuous part before using.
●Do not use when the temperature drops below 5°C from the start of work until curing is complete, or when rain is expected within 30 hours.
●Do not use this product when the base is damp or wet. Hardening may be insufficient and may swell with moisture.
Make sure the base is dry before using.
Also, please do not get water for 30 hours after installation.
●Curing time and amount of application may vary slightly depending on weather conditions and application conditions.
●Depending on the depth and width of the filling, cracks may occur at the filling point or the grain may become thinner.
In that case, please fill it again.
●If the hole at the tip of the nozzle is as small as 3mm or less, it may be difficult to push out the contents by hand.
In that case, cut off the tip of the nozzle again so that the hole becomes larger.
●Wash tools with water or soapy water after use before they harden.

【standard】
Capacity: 200ml
1 color
white

[Approximate usage amount]
When repairing a gap of 6mm width and 6mm depth
200ml about 5.4m

[Material/ingredients]
acrylic resin, urethane resin, inorganic filler, pigment, water

[Curing time]
Summer/Approx. 4 hours Winter/Approx. 6 hours

Our product JAN code
4970925310897